⟁ Texas Water Well Reports field records · 2026 survey

Texas Water Well Reports › Kenedy County

Kenedy County, Texas: well depth, water level & drilling cost

✓ 160 TDLR SDR records · verified 2026-06-27

822 ftmedian well depth
711 ft–1,010 fttypical depth range
33 ftmedian static water level
60 gpmmedian yield (132 tests)

How deep are wells in Kenedy County, Texas?

The median drilled well depth in Kenedy County is 822 ft, based on 153 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 711 ft and 1,010 ft; 90% are shallower than 1,237 ft. Wells drilled since 2016 have a median depth of 860 ft.

How much does it cost to drill a well in Kenedy County?

Applying published per-foot rates to the local median depth of 860 ft: drilling and casing alone typically runs $21,500–$55,900; a complete system including pump, pressure tank, and hookup typically runs $51,600–$86,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Kenedy County?

The median static water level is 33 ft below ground surface (middle half of wells: 19 ft–45 ft), from 153 measurements.

How much water do wells in Kenedy County produce?

The median tested yield is 60 gpm (middle half: 29 gpm–90 gpm), from 132 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Kenedy County address — $19

Drilled depth distribution

0–50 ft 3 50–100 ft 0 100–150 ft 1 150–200 ft 1 200–300 ft 9 300–400 ft 0 400–600 ft 4 600+ ft 135

Who drills wells in Kenedy County?

Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).

DrillerWells since 2016
J&S WATER WELLS28
J4 Water Works, LLC6
Richardson Water Well Drilling6
Cinco E Inc.6
Bell Water Well Service6
James Pawlik Water Wll Service, Inc.6
MARAL DRILLING4
Haner Water Well Service3

Get quotes from local drillers

Looking at a specific property in Kenedy County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.