Texas Water Well Reports › Red River County
Red River County, Texas: well depth, water level & drilling cost
✓ 181 TDLR SDR records · verified 2026-10-19
Pull every recorded well near a Red River County address — $49
How deep are wells in Red River County, Texas?
The median drilled well depth in Red River County is 203 ft, based on 180 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 72 ft and 404 ft; 90% are shallower than 557 ft. Wells drilled since 2016 have a median depth of 155 ft.
How much does it cost to drill a well in Red River County?
Applying published per-foot rates to the local median depth of 203 ft: drilling and casing alone typically runs $5,075–$13,195; a complete system including pump, pressure tank, and hookup typically runs $12,180–$20,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Red River County?
The median static water level is 23 ft below ground surface (middle half of wells: 16 ft–40 ft), from 126 measurements.
How much water do wells in Red River County produce?
The median tested yield is 38 gpm (middle half: 20 gpm–70 gpm), from 157 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Red River County?
Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).
| Driller | Wells since 2016 |
|---|---|
| C. Miller Drilling | 28 |
| Dwyer Water Wells | 25 |
| W.E. Pender & Sons Inc | 14 |
| W. E. Pender & Sons, Inc. | 8 |
| W E Pender | 5 |
| Folmar Drilling Co. | 4 |
| All About Wells & Service, llc | 4 |
| A1 Water Wells | 4 |
See every driller with wells on record in Red River County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Red River County.
Well records by ZIP code in Red River County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Clarksville (75426) — 61 wells, median 77 ft
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.