Texas Water Well Reports › Van Zandt County
Van Zandt County, Texas: well depth, water level & drilling cost
✓ 2,353 TDLR SDR records · verified 2026-06-27
How deep are wells in Van Zandt County, Texas?
The median drilled well depth in Van Zandt County is 440 ft, based on 2,352 wells with recorded depths in the state TDLR SDR database. Half of all wells fall between 300 ft and 520 ft; 90% are shallower than 580 ft. Wells drilled since 2016 have a median depth of 440 ft.
How much does it cost to drill a well in Van Zandt County?
Applying published per-foot rates to the local median depth of 440 ft: drilling and casing alone typically runs $11,000–$28,600; a complete system including pump, pressure tank, and hookup typically runs $26,400–$44,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Van Zandt County?
The median static water level is 150 ft below ground surface (middle half of wells: 97 ft–190 ft), from 2,081 measurements.
How much water do wells in Van Zandt County produce?
The median tested yield is 25 gpm (middle half: 20 gpm–40 gpm), from 2,115 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Van Zandt County address — $19
Drilled depth distribution
Who drills wells in Van Zandt County?
Companies by number of water wells completed in this county since 2016, per filed driller reports (SDR).
| Driller | Wells since 2016 |
|---|---|
| Chambers & Phillips Inc | 501 |
| East Texas Water Well | 165 |
| Ace Water well & Pump Svc. | 128 |
| CHAMBERS & PHILLIPS INC | 87 |
| chambers & Phillips Inc | 47 |
| D and D Water Wells and Submersible Pump Service | 34 |
| AYERS DRILLING | 32 |
| Ballard Water Well | 12 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Van Zandt County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Canton (75103) — 907 wells, median 440 ft
- Ben Wheeler (75754) — 471 wells, median 508 ft
- Grand Saline (75140) — 223 wells, median 400 ft
- Van (75790) — 93 wells, median 420 ft
- Edgewood (75117) — 90 wells, median 280 ft
- Wills Point (75169) — 62 wells, median 240 ft
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.