Texas Water Well Reports › Upshur County › Big Sandy (75755)
Big Sandy, TX (75755): well depth, water level & drilling cost
✓ 182 TDLR SDR records · Upshur County
Pull every recorded well near a Big Sandy (75755) address — $49
How deep are wells in Big Sandy (75755), Texas?
The median drilled well depth in Big Sandy (75755) is 402 ft, based on 181 wells with recorded depths in the state TDLR SDR database. Half fall between 150 ft and 560 ft; 90% are shallower than 742 ft.
How much does it cost to drill a well in Big Sandy (75755)?
Applying published per-foot rates to the local median depth of 402 ft: drilling and casing alone typically runs $10,050–$26,130; a complete system including pump, pressure tank, and hookup typically runs $24,120–$40,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Big Sandy (75755)?
The median static water level is 120 ft below ground surface (middle half of wells: 59 ft–220 ft), from 168 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Upshur County.
Part of Upshur County well records.
Method: medians computed from TDLR SDR records (water-supply wells only (domestic, irrigation, stock, public supply, industrial) — monitoring, environmental borings, test holes, injection and geothermal excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.